ItalWax depilatory wax Zinc Oxide 100 ml - Roll-On
Related products
Product detailed description
Creamy depilatory wax for sensitive skin
ItalWax Zinc Oxide is a high density roll-on depilatory wax created for the needs of sensitive skin. Thanks to its high adherence, it is also suitable for short, stubborn and thicker hairs that can be more difficult to remove.
The creamy consistency allows for an even application of a thin layer using the practical roll-on applicator.
High adherence for short and thick hairs
The formula is designed so that the wax adheres well to the hairs, allowing for their effective removal using a depilatory strip.
The wax is applied in the direction of hair growth and then removed with a quick movement against the direction of growth.
Roll-on application – fast and even layer
The packaging includes a roll-on applicator, allowing the wax to be applied directly to the skin without the need for a spatula. The practical design is suitable for professional depilation as well as home use.
Before application, the wax is heated in a compatible mono heater for approximately 30–40 minutes depending on its density.
Working temperature 39–40 °C
The wax is heated to a working temperature of approximately 39–40 °C. Always check the temperature of the wax before application to ensure it is not too hot for the skin.
For optimal results, it is recommended to prepare the skin before depilation with a pre-depilatory product and use suitable post-depilation care after hair removal.
Main benefits
- creamy roll-on depilatory wax
- suitable for sensitive skin
- high density
- high adhesion
- suitable for short and thick hairs
- easy application using a roll-on
- applied in a thin layer
- removed using depilation strips
- working temperature approximately 39–40 °C
- suitable for a mono heater
- contains essential oil
- volume 100 ml
Usage
- Remove the protective strip from the roll-on.
- Insert the wax into a suitable mono heater.
- Heat for approximately 30–40 minutes to a working temperature of 39–40 °C.
- Always check the temperature of the wax before application.
- Cleanse and degrease the skin with a suitable pre-depilation product and dry thoroughly.
- Using the roll-on, apply a thin layer of wax in the direction of hair growth.
- Place a waxing strip onto the wax and press it down firmly.
- Remove the strip with a quick motion against the direction of hair growth.
- After waxing, treat the skin with a suitable post-depilatory product.
Technical parameters
Product: ItalWax Zinc Oxide
Type: warm waxing wax with a roll-on applicator
Consistency: creamy, high density
Intended use: sensitive skin / short and coarse hair
Application: roll-on
Removal: with waxing strips
Working temperature: approx. 39–40 °C
Heating time: approx. 30–40 minutes
Heater: mono heater for roll-on waxes
Volume: 100 ml
FAQ
What type of hair is ItalWax Zinc Oxide suitable for?
The wax is particularly suitable for the removal of short and coarse hair. It has high density and adherence.
Is it suitable for sensitive skin?
Yes. ItalWax Zinc Oxide is designated by the manufacturer as a creamy wax for sensitive skin.
Do I need depilation strips for the wax?
Yes. This is a roll-on wax that is removed using waxing papers or strips after application.
Do I need a heater?
Yes. The cartridge is heated before use in a suitable mono heater for roll-on waxes.
How long does the wax take to heat up?
Depending on the density, approximately 30–40 minutes until it reaches the appropriate working consistency and temperature.
In which direction is the wax applied?
Apply the wax in the direction of hair growth. Then remove the waxing strip with a quick motion against the direction of growth.
Is the roll-on part of the packaging?
Yes. According to the manufacturer's data, the roll-on applicator is part of the wax packaging.
Additional parameters
| Category: | Epilation waxes |
|---|---|
| EAN: | 8052532720743 |